Subaru Crosstrek FB20 Oil Consumption: Affected Years, Causes, and Fixes

If you drive or plan to buy an early Subaru Crosstrek, oil consumption is likely on your radar. Many owners report burning through quarts of oil between regular services. Here is a clear breakdown of affected model years, causes, and practical solutions.

Which Crosstrek Years Are Most Affected?

The oil consumption issue primarily impacts the first-generation Crosstrek, originally sold as the Subaru XV Crosstrek.

  • 2013 Subaru XV Crosstrek: This was the debut model year in North America, and it saw the highest frequency of complaints regarding excessive oil loss.
  • 2014 Subaru XV Crosstrek: Continued to experience widespread oil consumption issues across both trim levels.
  • 2015 Subaru XV Crosstrek: Early production runs of the 2015 model year still had oil retention issues, though Subaru began phasing in updated internal engine components midway through the production cycle.

Vehicles equipped with the five-speed manual transmission tended to show higher rates of oil burning than those equipped with the Lineartronic Continuously Variable Transmission (CVT). Manual models naturally operate across broader RPM ranges and experience higher vacuum conditions during engine braking, which pulls more oil into the combustion chambers.

By 2016 and 2017, Subaru updated the piston ring design on the factory assembly line, drastically lowering reports of excessive burning. When the second-generation Crosstrek arrived for the 2018 model year, Subaru introduced a redesigned direct-injection engine (the FB20D), which resolved the systemic ring-seating defect.

Root Causes of the FB20 Oil Consumption Problem

The FB20 engine is a 2.0-liter, horizontally opposed four-cylinder boxer engine. While durable overall, early iterations suffered from specific engineering choices aimed at maximizing fuel efficiency.

1. Low-Tension Piston Rings

Automakers faced strict emissions and fuel economy standards in the early 2010s. To reduce internal mechanical friction and squeeze out extra miles per gallon, Subaru engineers fitted the FB20 with low-tension oil control rings. Unfortunately, these rings did not apply enough outward radial tension against the cylinder walls. As a result, oil slipped past the rings and burned directly inside the combustion chambers.

2. Ultra-Thin 0W-20 Synthetic Oil

Subaru specifies 0W-20 full synthetic motor oil for the FB20 engine to minimize drag during cold starts and improve efficiency. Because 0W-20 is very thin, it slips past loose or stuck piston rings far more easily than heavier viscosities like 5W-30, especially at highway speeds.

3. Faulty or Stuck PCV Valves

The positive crankcase ventilation (PCV) valve regulates crankcase pressure by routing blow-by gases back into the intake manifold. On many FB20 engines, the PCV valve can stick or become gummed up with carbon deposits. When this valve fails to vent properly, excessive crankcase pressure forces oil vapor into the intake, where the engine consumes it.

What Owners Experience and Report

Owners dealing with an affected FB20 engine generally report a consistent set of warning signs:

  • Low Oil Dashboard Light: Drivers often notice the low oil level warning light illuminating every 1,000 to 2,000 miles, long before the recommended 6,000-mile oil change interval.
  • Clean Driveways with Missing Oil: Because the oil is burned internally during combustion rather than leaking onto the ground, owners rarely see oil spots on their garage floor or driveway.
  • Soot Around the Tailpipe: A dark, oily coating around the exhaust tip is common as burnt oil travels through the exhaust system.
  • Fouled Spark Plugs and Premature Catalytic Converter Wear: Over time, unburnt oil coats spark plug electrodes, leading to rough idling or misfires. It can also clog the catalytic converter, triggering check engine light codes like P0420.

The Subaru Class Action Lawsuit and Warranty Extension

The issue grew widespread enough that owners filed a class action lawsuit against Subaru of America (White v. Subaru of America, Inc.). In 2016, a settlement was finalized that benefited owners of affected 2013 to 2015 Crosstrek models.

Under the terms of the settlement, Subaru:

  • Extended the factory powertrain warranty on affected engines to 8 years or 100,000 miles from the original in-service date.
  • Reimbursed owners for past out-of-pocket expenses related to towing, oil purchases, and repairs.
  • Established a standardized dealer oil consumption test.

During the dealership test, technicians filled the crankcase to the exact full line, marked the drain plug and dipstick with tamper-evident tape, and instructed the driver to return after driving 1,200 miles. If the engine consumed more than one-third of a quart (about 10.7 ounces) during that span, Subaru replaced the short block assembly free of charge under warranty.

How to Manage an FB20 Crosstrek Today

Because the original 8-year or 100,000-mile extended warranty period has expired for nearly all 2013 to 2015 vehicles, current owners and used car shoppers should take specific steps to protect their investment.

Check the Oil Level Frequently

Never rely solely on dashboard warning lights. Pull the dipstick every two fuel fill-ups. Boxer engines sit flat, so park on level ground and let the engine rest for 10 to 15 minutes after shutting it off to get an accurate reading.

Replace the PCV Valve

The PCV valve is inexpensive and simple to replace. Swapping out an old PCV valve every 30,000 miles can reduce crankcase pressure and prevent oil vapor from entering the intake tract.

Keep Spare Oil in the Vehicle

Always carry a quart of 0W-20 synthetic oil and a funnel in the cargo area. Topping off the engine before it drops below the low mark on the dipstick protects critical components like the camshafts, variable valve timing solenoids, and connecting rod bearings.

Check Vehicle Service History

If you are shopping for a used 2013 to 2015 Crosstrek, request the vehicle service history from a Subaru dealership using the VIN. Look to see if the original engine short block was already replaced with the updated, revised assembly under warranty.

Frequently Asked Questions

How much oil consumption is considered normal for a Subaru Crosstrek?
Subaru originally defined acceptable consumption as up to one quart every 1,200 miles under severe driving conditions. However, most mechanics and drivers consider anything over one quart every 2,500 to 3,000 miles to be excessive for everyday driving.

Can I run 5W-30 oil instead of 0W-20 to reduce consumption?
In the United States, Subaru officially recommends 0W-20 for fuel economy and cold-start lubrication. While slightly thicker oils like 5W-30 may slow consumption in worn engines, using an unapproved viscosity can affect variable valve timing operation and fuel economy. Consult your owner manual or a certified Subaru technician before changing viscosity.

Did the 2018 and newer Crosstrek models fix this problem?
Yes. The 2018 model year marked the launch of the second-generation Crosstrek with the revised FB20D direct-injected engine. This newer generation features redesigned pistons, improved ring packs, and modified crankcase ventilation, effectively eliminating the chronic oil burning seen in early models.